FAQs Archive » Page 5 of 5 » On-course Solutions

The application rate for Hydrotac varies from .02 to .10 litres per square meter depending on soil conditions as well as desired effectiveness.

The best ratio to use is 1 part Hydrotac to 10-15 parts water (the Hydrotac is always added to the water) Again this depends on soil conditions.

Hydrotac comes in mini bulk containers that hold up to 1,040 litres

Hydrotac should ideally be stored in a location to protect it from freezing (above 40º F or 4º C)

What is the recommended application rate for Hydrotac?

on-course-solutions2017-11-10T23:28:16+00:00November 10th, 2017|Categories: Hydro seeding FAQ|

The application rate for Hydrotac varies from .02 to .10 […]

on-course-solutions2017-11-10T23:27:48+00:00November 10th, 2017|Categories: Hydro seeding FAQ|

The best ratio to use is 1 part Hydrotac to […]

on-course-solutions2017-11-10T23:27:04+00:00November 10th, 2017|Categories: Hydro seeding FAQ|

Using Hydrotac has proven to decrease germination time up to […]

on-course-solutions2017-11-10T23:26:24+00:00November 10th, 2017|Categories: Hydro seeding FAQ|

Hydrotac comes in mini bulk containers that hold up to […]

on-course-solutions2017-11-10T23:25:56+00:00November 10th, 2017|Categories: Hydro seeding FAQ|

Hydrotac should ideally be stored in a location to protect […]

on-course-solutions2017-11-10T23:06:47+00:00November 10th, 2017|Categories: Hydro seeding FAQ|

More cost effective, environmentally friendly, easier to apply, only applied […]